FAQs

ARE QuickStep® FLOORS recommended for use in bathrooms?
What areas is the product recommended for?

QuickStep® laminate floors are very durable and made with our patented Uniclic® locking system. This locking system allows for the use of our products in both bathrooms and kitchens as long as certain precautions are taken. We do not recommend the use of any of our beveled products in bathrooms. However, our non-beveled products can and have been used successfully in bathrooms. We have special installation instructions to follow when installing QuickStep® laminate flooring in the bathroom. In the kitchen, you may use any of our products including beveled products. Care must be taken to avoid leaving water on the floors. The perimeter gap around the sink, dishwasher, garbage compactor, any outside entrance door, and behind the refrigerator must be completely filled with QuickStep® Sealant or a quality silicon caulk. Wet areas include but are not limited to: bathrooms, powder rooms, kitchens, mud rooms, foyers, and laundry rooms. Neither QuickStep® flooring, nor QuickStep® accessories are recommended for extreme humidity applications such as in saunas or swimming pool areas. Since prolonged water exposure could damage your laminate flooring, the following installation recommendations should be closely followed:

  • An expansion area of 5/16" – 3/8" must be provided around all vertical obstructions including walls, permanent cabinets, pipes, etc.
  • All perimeter expansion areas must be completely filled in using the QuickStep® Sealant Kit. When applying sealant, it is helpful to first apply a strip of masking tape parallel to and approximately 1/32" from the edge of the laminate. Then fill the expansion area with sealant, remove excess with a plastic scraper or putty knife, and remove tape. Let dry for 24 hours before exposure to water.
  • Maximum 40 ft (12.2 meter) lengths can be installed without a transition joint. Under each entrance door of the room, a transition joint must be installed.
  • QuickStep® maintenance products should be used and QuickStep® maintenance procedures should be followed for years of enjoyment of your QuickStep® flooring.
  • Wipe up spills immediately. Do not allow liquids to stand on your floor or stay in contact with any QuickStep® accessory.

 

 

What if I have allergies?

Thanks to the closed surface structure of QuickStep® laminate floors and the closed joints between the boards, there's nowhere for dust to creep. Moreover, the perfect laying and finishing of your QuickStep® floor means it's easy to clean. Dust mites and other allergy-causing organisms cannot survive on clean laminate floors. This will help you protect your home from allergens. This is extremely important for people suffering from asthma or dust allergies. To maintain good hygiene it is essential that you always use a QuickStep® maintenance product for cleaning. These do not contain any wax or varnish which can attract dust. With the QuickStep® microfiber tissues (QuickStep® maintenance kit) you can easily remove all dust.

 

What is laminate flooring?

QuickStep® is a laminate floor. The base of a QuickStep® floor is a watertight, glued HDF board (High Density Fibre Board). This is covered with a design layer and a transparent overlay against wear and tear. Underneath, a barrier layer stops rising damp and prevents the boards from deforming. The design layer is a photo of wood or tiles that is printed on paper. This paper is submerged in melamine resin. This is covered with a very strong and transparent protective layer. The melamine layers are pressed on the HDF board in a press under high pressure and temperature. In addition, a wood or tile structure is also pressed into the top layer. For example, the oak designs have a wood texture that coincide exactly with the wood pattern. The highly refined printing technique means that you can hardly tell the difference between the photo and real wood. So you can have a "wooden floor" in your home without sacrificing valuable trees. In addition, you don't have to worry about the disadvantages of a wooden floor. There's a QuickStep® laminate floor for every budget. They are easy and fast to install (yourself) and easy to maintain.

 

Where can I buy QuickStep® flooring?

QuickStep® floors are sold through specialty retail shops. To find the dealer nearest you, click here.

 

I have kids, a dog and a lot of foot traffic in my home. How durable are QuickStep® floors?

By passing a variety of rigorous performance tests to ensure durability, strength and overall quality, our floors have earned the North American Laminate Flooring Association (NALFA) Certification Seal. To learn more, visit NALFA.com. Additionally, an AC-rating measures how well a floor will resist damage from abrasion, impact, stains, household chemicals and burns. All QuickStep® floors have achieved an AC-3 or AC-4 rating, meaning that they can withstand normal wear and tear associated with increased foot traffic in heavy residential or light commercial applications. No floor covering is impervious to damage, however. Please visit us.quick-step.com/installation-and-care/cleaning-maintenance for complete care and maintenance instructions.

 

 

If you have a question about our products and don't see the answer here please contact us.